0
LOWE'S RUDOLPH ANIMATRONIC TO CLARICE CONVERSION KIT / CHRISTMAS PRODUCTS
Image 1 of LOWE'S RUDOLPH ANIMATRONIC TO CLARICE CONVERSION KIT
Image 2 of LOWE'S RUDOLPH ANIMATRONIC TO CLARICE CONVERSION KIT
Image 3 of LOWE'S RUDOLPH ANIMATRONIC TO CLARICE CONVERSION KIT
Image 4 of LOWE'S RUDOLPH ANIMATRONIC TO CLARICE CONVERSION KIT
Image 5 of LOWE'S RUDOLPH ANIMATRONIC TO CLARICE CONVERSION KIT
Image 6 of LOWE'S RUDOLPH ANIMATRONIC TO CLARICE CONVERSION KIT
Image 7 of LOWE'S RUDOLPH ANIMATRONIC TO CLARICE CONVERSION KIT
Image 8 of LOWE'S RUDOLPH ANIMATRONIC TO CLARICE CONVERSION KIT
1 / 8
1 of 8

LOWE'S RUDOLPH ANIMATRONIC TO CLARICE CONVERSION KIT

$35.00 - $40.00

This kit includes PLA+ 3d printed parts - Please be patient - these are made as fast as I can. 9hr print time due to 2.5MM heavy walls and 40% infill to make sure these last.

SET INCLUDES - pick from dropdown menu

$40.00
1 - RED POPPY or FIRE RED painted PLA+ bow w/ WHITE dots
1 - DARK BRONZE painted PLA+ nose
1 set of laser cut black foam eyelashes

OR -

$35.00
1 - ready to paint PLA+ bow
1 - ready to paint PLA+ nose
1 set of laser cut black EVA foam eyelashes pre-curled

Paint used on bow is Krylon Fusion Fire Red or Red Poppy depending on in stock colors both are very close. Nose is Krylon fusion Dark Bronze.

Paint used for body was Krylon Fusion all in one Satin Kakhi (PICTURE OF CAN IN IMAGES)

If bow needs to be adjusted so pegs fit use a heat gun on center of bow to make PLA flexible (make sure not to get too hot and burn or melt it) insert into head holes and let cool before Paint and hot glue.

The PLA+ made items can be sanded and re-painted if you want a finer/smoother finish.

Step 1 - Remove Rudolphs horns be careful and wiggle slowly use hair drier to warm up glue to make easier.
Step 2 - Remove rudolphs nose again be careful. remember to release tape inside head holding power wire for nose.
Step 3 - Paint parts whatever colors you want. I used poppy red spray paint for bow and dark bronze for the nose.
Step 4 - Tape off all white parts of body, eyes, electronics with masking tape. (Remember to move part stickers or mark your own so you know assembly)
Step 5 - Paint body parts with Krylon fusion kakhi.
Step 6 - Hot glue bow with square pegs inserted into factory holes. Some adjusting and trimming of parts or head may be required.
Step 6 - Hot glue nose making sure to mind marks on underside for positioning.
Step 7 - Hot glue eyelashes on to head above eyes.

NO REFUNDS, RETURNS, OR EXCHANGES AS THESE ARE TO BE MODIFIED BY PURCHASER. THANKS FOR UNDERSTANDING.

* 3d printing is not perfect and items may have small defects that do not affect quality.
*These are hand painted and so each set is unique and may have small paint defects that do not affect quality.